Band and Strip Emitters

These heaters are constructed using Watlow's exclusive mineral insulation, which has high thermal conductivity. The band and strip emitters are also constructed of rugged stainless steel sheath with a high emissivity coating. These heaters can operate at temperatures to 1300°F (700°C), and 30 W/in² (4.7 W/cm²)

Specifications:

Material	Maximum Operating Temperatures		Maximum Watt Densities
Material	°F	°C	W/in²	W/cm²
Stainless steel	1300	700	30	4.7

Maximum operating temperature up to 1300°F (704°C)
Maximum watt densities up to 30 W/in² (4.7 W/cm²)
Strip Emitters: width: 2in. (51mm); length: 6in. (152mm). minimum, 31 in. (787mm)maximum
Band Emitters: width: 1 in. (25mm), 2 in. (51mm), 3 in (76mm). maximum; Segment Length: 6 in. (152mm) to 42 in. (1067mm) maximum
Mounting studs and mounting clips available
Optional thermocouple or thermocouple pocket welded to sheath
Contact Watlow representative for partial arcs up to full 360 degree coverage
High emissivity coating on inside is standard. For high emissivity coating on the outside, contact your Watlow representative
Post terminals are standard. High-temperature leads are available on bands only.

Applications:

Heating rotating drums and rollers
Tube ovens
Small spot heating
Heat shrinking and curing wire coatings
Heat laminating wheels

Features & Benefits:

Features	Benefits
Exclusive mineral insulation	Combines dielectric strength and superior thermal conductivity Transfers heat rapidly to the sheath
High thermal conductivity of MI	Provides an almost instant response to temperature control Eliminates thermal lag and temperature overshoot associated with other heaters

Related Literature

Quality Certificates (1)

ISO 9001:2008 (Exp. 2018) St. Louis

.pdf

72.805K

Catalogs (3)

Heater Catalog (Complete - .pdf)	.pdf	24075.168K
Heater Catalog (Section) - Heater Reference Data	.pdf	202.289K
Heater Catalog (Section) - Radiant Heaters	.pdf	398.298K